[sldev] lscript_compile error

Marine Kelley marinekelley at gmail.com
Sun Apr 6 04:38:24 PDT 2008


Well then I must apologize, I'm pretty much out of ideas here.

2008/4/6, Ajinkya Kale <kaleajinkya at gmail.com>:
>
> I have already seen the wiki. But no help from that solution.
> I am getting the same errors on ReleaseForDownload too.
>
>
> On Sun, Apr 6, 2008 at 4:24 AM, Marine Kelley <marinekelley at gmail.com>
> wrote:
> > I'm not sure, but perhaps this link will help :
> >
> http://wiki.secondlife.com/wiki/Common_compilation_problems#Unresolved_external_symbol_.22int___cdecl_lscript_compile.22_.28VS2005.29
> >
> > Also you're still building ReleaseNoOpt.
> >
> >
> >
> >
> >
> > 2008/4/6, Ajinkya Kale <kaleajinkya at gmail.com>:
> > > Yes I changed the order and it worked.
> > > But when I build newview I get the same old llcompilequeue.obj  and
> > > llpreviewscript.obj  errors. I am fed up due to these same errors
> > > evrytime :(   I also rebuilt lscript_comiple and
> > > lscript_compile_fb_vc8. They were built without any errors ! So why
> > > the errors on building newview ?
> > >
> > > 1>------ Skipped Build: Project: win_crash_logger, Configuration:
> > > ReleaseNoOpt Win32 ------
> > > 1>Project not selected to build for this solution configuration
> > > 2>------ Build started: Project: newview, Configuration: ReleaseNoOpt
> > >
> > > Win32 ------
> > > 2>Executing pre-build batch file
> > >
> > > 2>PREBUILD SUCCESSFUL
> > > 2>Linking...
> > > 2>llcompilequeue.obj : error LNK2019: unresolved external symbol "int
> > > __cdecl lscript_compile(char const *,char const *,char const *,int)"
> > > (?lscript_compile@@YAHPBD00H at Z) referenced in function "protected:
> > > void __thiscall LLFloaterCompileQueue::compile(char const *,class
> > > LLUUID const &)"
> > > (?compile at LLFloaterCompileQueue@@IAEXPBDABVLLUUID@@@Z)
> > > 2>llpreviewscript.obj : error LNK2001: unresolved external symbol "int
> > > __cdecl lscript_compile(char const *,char const *,char const *,int)"
> > > (?lscript_compile@@YAHPBD00H at Z)
> > >
> > > 2>ReleaseNoOpt/newview_noopt.exe : fatal error LNK1120: 1 unresolved
> > externals
> > >
> > > 2>Build log was saved at "file://h:\SL Open source
> > >
> > >
> >
> codes\slviewer-src-Branch_1-19-0-Viewer-r80803\linden\indra\newview\ReleaseNoOpt\BuildLog.htm"
> > >
> > > 2>newview - 3 error(s), 0 warning(s)
> > >
> > > ========== Build: 0 succeeded, 1 failed, 20 up-to-date, 1 skipped
> > ==========
> > >
> > >
> > >
> > > On Sun, Apr 6, 2008 at 4:09 AM, Marine Kelley <marinekelley at gmail.com>
> > wrote:
> > > > Perhaps you have put C:\Cygwin\bin before the VC bin directory...
> which
> > > > means VC tries to link using the cygwin link.exe instead of its own.
> Try
> > to
> > > > change the order of the paths in your Path variable in VC.
> > > >
> > > > Hope this helps
> > > >
> > > >
> > > >
> > > > 2008/4/6, Ajinkya Kale <kaleajinkya at gmail.com>:
> > > > > Ok. So now what i did is I added C:\cygwin\bin to the VC++
> > > > > Directories\Executable Files\   list. And I rebuilt the
> > > > > lscript_compile and lscript_compile_fb_vc8 projects. They were
> built
> > > > > successfully without any errors.
> > > > >
> > > > > But now when i try to Build newview I get the following error :
> > > > >
> > > > >
> > > > > 1>------ Build started: Project: newview, Configuration:
> > > > > ReleaseForDownload Win32 ------
> > > > > 1>Executing pre-build batch file
> > > > > 1>PREBUILD SUCCESSFUL
> > > > > 1>Linking...
> > > > >
> > > > > 1>link: extra operand `/ERRORREPORT:PROMPT'
> > > > > 1>Try `link --help' for more information.
> > > > > 1>Project : error PRJ0002 : Error result 1 returned from
> > > > > 'C:\cygwin\bin\link.exe'.
> > > > >
> > > > > 1>Build log was saved at "file://h:\SL Open source
> > > > >
> > > > >
> > > >
> >
> codes\slviewer-src-Branch_1-19-0-Viewer-r80803\linden\indra\newview\ReleaseForDownload\BuildLog.htm"
> > > > > 1>newview - 1 error(s), 0 warning(s)
> > > > > ========== Build: 0 succeeded, 1 failed, 21 up-to-date, 0 skipped
> > > > ==========
> > > > >
> > > > >
> > > > >
> > > > > Waiting for your suggestions.
> > > > >
> > > > >
> > > > > On Sun, Apr 6, 2008 at 3:57 AM, Marine Kelley <
> marinekelley at gmail.com>
> > > > wrote:
> > > > > > It seems your bison.exe and mv.exe files are not in any of the
> paths
> > > > you've
> > > > > > provided to VC.
> > > > > >
> > > > > >
> > > > > >
> > > > > > 2008/4/6, Ajinkya Kale <kaleajinkya at gmail.com>:
> > > > > > > When I try to recompile lscript_compile and
> lscript_compile_fb_vc8
> > I
> > > > > > > get the following errors :
> > > > > > >
> > > > > > > 1>------ Rebuild All started: Project: lscript_compile_fb_vc8,
> > > > > > > Configuration: Release Win32 ------
> > > > > > > 1>Deleting intermediate and output files for project
> > > > > > > 'lscript_compile_fb_vc8', configuration 'Release|Win32'
> > > > > > > 2>------ Rebuild All started: Project: lscript_library,
> > Configuration:
> > > > > > > Release Win32 ------
> > > > > > > 2>Deleting intermediate and output files for project
> > > > > > > 'lscript_library', configuration 'Release|Win32'
> > > > > > > 1>Building ytab.cpp
> > > > > > > 2>Compiling...
> > > > > > > 2>lscript_library.cpp
> > > > > > > 1>'bison.exe' is not recognized as an internal or external
> > command,
> > > > > > > 1>operable program or batch file.
> > > > > > > 1>'mv.exe' is not recognized as an internal or external
> command,
> > > > > > > 1>operable program or batch file.
> > > > > > > 1>Project : error PRJ0019: A tool returned an error code from
> > > > > > > "Building ytab.cpp"
> > > > > > > 2>lscript_export.cpp
> > > > > > > 2>lscript_alloc.cpp
> > > > > > > 2>Generating Code...
> > > > > > >
> > > > > > > 1>Build log was saved at "file://h:\SL Open source
> > > > > > >
> > > > > > >
> > > > > >
> > > >
> >
> codes\slviewer-src-Branch_1-19-0-Viewer-r80803\linden\indra\lscript\lscript_compile\Release_fb\BuildLog.htm"
> > > > > > > 1>lscript_compile_fb_vc8 - 1 error(s), 0 warning(s)
> > > > > > > 2>Creating library...
> > > > > > >
> > > > > > > 2>Build log was saved at "file://h:\SL Open source
> > > > > > >
> > > > > > >
> > > > > >
> > > >
> >
> codes\slviewer-src-Branch_1-19-0-Viewer-r80803\linden\indra\lscript\lscript_library\Release\BuildLog.htm"
> > > > > > > 2>lscript_library - 0 error(s), 0 warning(s)
> > > > > > > 3>------ Rebuild All started: Project: lscript_compile,
> > Configuration:
> > > > > > > Release Win32 ------
> > > > > > > 3>Deleting intermediate and output files for project
> > > > > > > 'lscript_compile', configuration 'Release|Win32'
> > > > > > > 3>Compiling...
> > > > > > > 3>lscript_typecheck.cpp
> > > > > > > 3>lscript_tree.cpp
> > > > > > > 3>lscript_scope.cpp
> > > > > > > 3>lscript_resource.cpp
> > > > > > > 3>lscript_heap.cpp
> > > > > > > 3>lscript_error.cpp
> > > > > > > 3>lscript_bytecode.cpp
> > > > > > > 3>lscript_alloc.cpp
> > > > > > > 3>Generating Code...
> > > > > > > 3>Creating library...
> > > > > > >
> > > > > > > 3>Build log was saved at "file://h:\SL Open source
> > > > > > >
> > > > > > >
> > > > > >
> > > >
> >
> codes\slviewer-src-Branch_1-19-0-Viewer-r80803\linden\indra\lscript\lscript_compile\Release\BuildLog.htm"
> > > > > > > 3>lscript_compile - 0 error(s), 0 warning(s)
> > > > > > > ========== Rebuild All: 2 succeeded, 1 failed, 0 skipped
> > ==========
> > > > > > >
> > > > > > > I have also separated the commanline in the properties of
> indra.y.
> > > > > > > Still no success :(
> > > > > > >
> > > > > > > Waiting for your suggestions.
> > > > > > >
> > > > > > >
> > > > > > > On Sun, Apr 6, 2008 at 3:25 AM, Marine Kelley
> > <marinekelley at gmail.com>
> > > > > > wrote:
> > > > > > > > Hi, I'm not sure but when I get link error from obj files I
> am
> > sure
> > > > I
> > > > > > have
> > > > > > > > already compile, I rebuild the projects they are issued from
> (or
> > at
> > > > > > least I
> > > > > > > > recompile their cpp files). Most of the time it is due to a
> VC
> > > > problem,
> > > > > > > > corrupting obj files.
> > > > > > > >
> > > > > > > > Marine
> > > > > > > >
> > > > > > > > 2008/4/6, Ajinkya Kale <kaleajinkya at gmail.com>:
> > > > > > > > > Hi,
> > > > > > > > >
> > > > > > > > > Can anyone please suggest me any work around for the
> > > > > > > > > llcompilequeue.obj and llpreviewscript.obj errors ? I am
> not
> > able
> > > > to
> > > > > > > > > compile the viewer due to these errors.
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Ciao,
> > > > > > >
> > > > > > > Ajinkya
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Ciao,
> > > > >
> > > > > Ajinkya
> > > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > --
> > > Ciao,
> > >
> > > Ajinkya
> > >
> >
> >
>
>
>
>
> --
> Ciao,
>
> Ajinkya
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.secondlife.com/pipermail/sldev/attachments/20080406/4844a0f6/attachment-0001.htm


More information about the SLDev mailing list